SATCOM Index Logo
SATCOM INDEX
  • Basics
  • Providers
  • Comparison
  • Guides
  • Tools
LogoSATCOM Index
SATCOM Index Logo
SATCOM INDEX

An independent technical knowledge base for international satellite communication systems.

ArticlesGlossarySolutionsGEO Look Angle ToolLink Budget CalculatorAboutContactEditorial PolicyTechnical ReviewCorrections PolicyMethodologyPrivacy PolicyCookie PolicyTerms of Service
© 2026 SATCOM Index. All rights reserved.•An unofficial technical community. Not affiliated with any satellite operator.
v1.1.1
Free engineering tool

Satellite Link Budget Calculator

Calculate a GEO satellite link budget from EIRP, antenna size, system noise temperature, slant range, symbol rate, and modem threshold, then test the margin against ITU-R P.618 rain fade at your availability target.

Calculations run locally in your browser. Share links put inputs after #; anyone with the link can read them.

Step-by-step method and equations: Satellite link budget calculation with worked example

Satellite Link Budget Calculator

Geometry
°
km
°
km
Downlink (satellite to terminal)
GHz
dBW
m
K
dB
Uplink (hub or gateway to satellite)
dB
Carrier and threshold
Msym/s
dB
dB
Rain fade (ITU-R P.618)

Example sites fill coordinates, altitude, R0.01, and rain height from ITU-R P.837-7 and P.839-4 maps (rounded). They switch geometry to the GEO site mode; set the satellite longitude you plan to use.

mm/h
km
%

Results

Clear-sky link margin

+2.83 dB

Link closes

Margin at 99.7% availability

-3.45 dB

Link does not close

Elevation angle
37.20 °
Slant range
38,000 km
Downlink wavelength
0.02498 m
Receive antenna gain
41.70 dBi
Terminal G/T
19.15 dB/K
Downlink free-space path loss
205.63 dB
Downlink C/N0
85.92 dB-Hz
Downlink C/N (Es/N0)
12.91 dB
Uplink C/N
18.00 dB
Combined C/N (Es/N0)
11.74 dB
Eb/N0 (from MODCOD efficiency)
8.22 dB
Information rate (no framing overhead)
45.00 Mbit/s
Required Es/N0 + implementation loss
8.91 dB

Rain fade at the receive site

k / α (P.838-3)
0.02398 / 1.1711
Specific attenuation at R0.01
5.089 dB/km
Effective path length
3.54 km
Rain attenuation exceeded 0.01%
18.00 dB
Rain attenuation exceeded 0.3%
4.28 dB
Sky-noise increase (Tm = 275 K)
172.4 K
Faded G/T
16.23 dB/K
Faded downlink C/N
5.71 dB
Faded combined C/N
5.46 dB
Allowed outage per year
1576.8 min

Noise bandwidth equals the symbol rate, so combined C/N is compared directly with the Es/N0 threshold. Uplink and downlink are combined in reciprocal linear form. Interference (C/I), transponder intermodulation, and uplink rain are not modeled.

Sharing puts changed inputs in the URL fragment (after #). Anyone with the link can read them. Calculations and CSV generation run in this browser.

Equations used

Every row uses logarithmic units. The constant 228.6 dB is -10 log10(k) for Boltzmann's constant.

EIRP  = Ptx + Gtx − Ltx                          dBW
G     = 10·log10[η·(π·D/λ)²],  λ = c/f          dBi
FSPL  = 92.45 + 20·log10(f GHz) + 20·log10(d km) dB
G/T   = Grx − 10·log10(Tsys)                     dB/K
C/N0  = EIRP + G/T − FSPL − Lother + 228.6       dB-Hz
C/N   = C/N0 − 10·log10(Bn)                      dB
C/Ntot = −10·log10(10^(−C/Nup/10) + 10^(−C/Ndown/10))
Eb/N0 = Es/N0 − 10·log10(m·r)
margin = C/Ntot − Limpl − (Es/N0)required        dB

Worked example (default inputs)

The defaults reproduce the 12 GHz GEO downlink example from the tutorial: 45.0 dBW per-carrier EIRP, a 1.2 m antenna at 65% efficiency, Tsys 180 K, 38,000 km slant range, 1.2 dB other losses, 20 Msym/s, uplink C/N 18.0 dB, 8PSK 3/4 (7.91 dB) and 1.0 dB implementation loss.

G = 41.70 dBi · G/T = 19.15 dB/K · FSPL = 205.63 dB · C/N0 = 85.92 dB-Hz · Es/N0 down = 12.91 dB · combined C/N = 11.74 dB · clear-sky margin = 2.83 dB

With Jakarta rain inputs (R0.01 = 97 mm/h, hR = 4.88 km, 37.2° elevation, horizontal polarization) at 99.7% availability, P.618 gives about 4.3 dB of rain attenuation plus about 172 K of sky noise, so the margin falls to about -3.45 dB: the carrier needs ACM, a lower MODCOD, or a larger antenna.

Rain fade method

Specific attenuation uses ITU-R P.838-3 coefficients. Path attenuation follows ITU-R P.618-14 Annex 1 Section 2.2.1.1 and is scaled from 0.01% to the exceedance implied by your availability target. Rain also raises the antenna noise temperature, which lowers G/T.

γR   = k·R0.01^α                                dB/km
A0.01 = γR · LE                                  dB
Ap   = A0.01·(p/0.01)^−(0.655 + 0.033 ln p − 0.045 ln A0.01 − β(1−p) sin θ)
ΔT   = Tm·(1 − 10^(−Ap/10)),  Tm = 275 K

Valid for 1-55 GHz and elevation angles of 5° or more. Use local long-term rain data or the current ITU-R P.837 map value for design work.

Planning boundary

This is a reproducible educational model, not an operator link analysis.

  • No adjacent-satellite, cross-polar, or co-channel interference, and no transponder intermodulation or backoff model.
  • Use per-carrier EIRP and G/T for your site from the operator, not beam-peak values.
  • Rain is applied to the downlink at the receive site only; uplink rain at the hub is normally handled by uplink power control.

Related references

  • Satellite link budget calculation with worked example
  • EIRP explained
  • G/T explained
  • C/N, C/N0 and Eb/N0
  • Rain fade in satellite communications
  • GEO look angle calculator
  • Maritime satellite connectivity
  • Energy, oil and gas connectivity